Integration

[NoodleChow]

Quote:

Originally Posted by Blade Raider

For fun, I'm going to guess what NoodleChow did. NoodleChow, let me know if I'm right.

1) Get a junker modern GI Joe elbow (from the looks of it, I'd say it's a 25th Duke elbow) and remove the plug and disc that makes up the actual joint.
2) Cut Lion-O's forarm off.
3) remove the black pin holding the elbow joint in place.
4) drill a hole in the disc of the Joe elbow the same size as the black pin.
5) Connect Joe elbow to lower arm using the black pin to hold it together.
6) Drill a hole into Lion-O upper arm for the plug (now attached to the lower arm) to sit in.
7) Plug lower arm into upper arm.

So, am I right NoodleChow?

PS Great custom. If I had the skills, I'd do the same.

haha yeah pretty much what i did. used revenge of the sith obi wan's ankle joints and didn't need to drill the hole any larger. the holes in the upper arm just need to accommodate the new peg after cutting the old disc off so you'll have to drill an inverted mushroom shape using a burring bit.