TFW2005HisstankThundercatsTokuNationToyark
Go Back   Thundercats.ws > Thundercats Forums > The Lair - Thundercats Discussion > Thundercats Toys and Merchandise

Reply
 
Thread Tools
Old 08-19-2011, 04:59 AM   #1
Thinktank
Thunder Kitty
Join Date: Aug 2011
Posts: 46
((I will hopefully have images to post later if my camera will cooperate later.))

I have second 6" Mumm-Ra I purchased for doing a wing job on once I have
all my parts in. In doing some prep work on the figure I have learned the
following technical features for this figure.

>> His waist is actually a ball joint:
It's hindered by the skirt components and is seated very deeply into the
waist area of the two piece thorax.

>> The figure has utilized a version of "Polycaps":
There are friction shims in the joint receivers for his neck, waist and
shoulders. These shims are the same plastic as his sheild and other
flexible parts.

>> The Claw-Sheild could have the ability to swap out the Claw assembly:
The claw assembly part of the sheild is glued on to a hard plastic peg
that resembles a keyhole. This peg has a groove that runs completely around
about haveway down it's depth. The claw plate has a ridge that interfaces
with said to groove to give a tight fit. This would require a separate
underplate with the claws retracted to be included.

((And the one you've been patiently waiting for.....))
>> He should have had wings on his back.
The two soft plastic filler plugs(#) fit and are glued into sockets
tha have a small flange receiver at their respective north and
south ends. The filler plugs have these little flanges that would
be more than easy enough to pry out if they had not been glued.
the depth of these receivers are significant and would have been
certainly strong enough to hold up a pair of wings of decent size.
Hopefully in the future there will be a "mega wing" version of
"The Ever Living" made available to the public.


(#) Strangely enough in his concept art master he has the very
same shapes drawn on his back:

Last edited by Thinktank; 08-19-2011 at 10:12 PM..
Thinktank is offline   Reply With Quote
Reply

Thread Tools

 
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
4" Thundercats & 6"Mumm ra thoughts and pics Weapon XIX Thundercats Toys and Merchandise 34 06-17-2012 05:37 PM
6" mumm-ra scale vs 4" evilanimation Thundercats Toys and Merchandise 40 09-08-2011 08:08 AM
Allen,Texas"JMV Toy Collectors SHow"Sunday July 24,2011 promotercat Thundercats Conventions and Get Togethers 0 06-27-2011 11:32 PM
Round Rock,Texas"JMV Toy Collectors Show"Sunday May 15,2011 promotercat Thundercats Conventions and Get Togethers 0 04-19-2011 09:36 PM
Dallas,Texas"JMV Toy Collectors Show"Sunday April 10,2011 promotercat Thundercats Conventions and Get Togethers 0 03-22-2011 11:25 PM

 

All times are GMT -5. The time now is 11:47 PM.

Powered by vBulletin®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Powered by vBadvanced CMPS